Submittal Sheet

OmegaFlex Catalog

Design & Installation Guide

FGP-RFG-500 – AutoFlare Steel Flange Mount for TracPipe CounterStrike – 1/2″ MPT

Self-Flaring Fitting – AutoFlare is the self-piloting fitting that attaches TracPipe CounterStrike to traditional gas fittings and appliances. No special tools or additional parts required.

Features

• Application Information: Termination fitting between TracPipe or CounterStrike Tubing and NPT thread. Fitting thread is Male NPT. For use indoor, outdoor, and concealed location applications.
• AutoSnap Flange Fitting 1/2″
• The new patent pending AutoSnap fittings are the only CSST fittings that do not require any disassembly or reassembly of the fitting to the CounterStrike CSST.
• This greatly reduces installation difficulty and time as there are no small loose gaskets, O-rings, or retainer rings to contend with in a dark and/or cold work place environment!
• AutoSnap is CSA listed and features a metal to metal cup seal without any exposed stainless steel pipe behind the new fitting.
• Reduced torque value and reusability all make for an optimum installer friendly fitting

Specifications

• Materials: Nut, Adapter and Snape Ring: Yellow Brass
• Mounting Flange: Steel
• Specification Operating Pressure: 25 PSIG
• CSA International Evaluation Report – Max Operating Pressure: 3/8″ through 1-1/4″: 125 PSIG
• Operating Temperature Range (used with tubing): -20 to 200 degrees F
• Codes: ICC Codes (IFGC, IRC, IMC), NFPA 54 / ANSI Z223.1, UPC, CAN/CSA B149.1, NFPA 58
• Standards: ANSI LC1 / CSA 6.26, ANSI Z223.1
• Listings: CSA, ICC PMG 1046 / 1052, IAPMO(UPC) File No. 4665

PTRAC10070